Not only can we not give you a value, we can't even tell whatKIND of gun it is just from a serial number. To give an approximateworth, we would need to know make, model, caliber, finish, andcondition. The serial number does not tell that- and it is notunique to only one gun. PS- many of the older rifles in mycollection HAVE no serial number. They were not required by lawuntil 1968.

1. Identify Gun By Serial Number
2. Identify Your Gun By Serial Number
3. Research Gun By Serial Number

Not only can we not give you a value, we can't even tell whatKIND of gun it is just from a serial number. To give an approximateworth, we would need to know make, model, caliber, finish, andcondition. The serial number does not tell that- and it is notunique to only one gun. PS- many of the older rifles in mycollection HAVE no serial number. They were not required by lawuntil 1968.

Is your gun a pre or post 1964 you have a 30 30 Winchester model 94 and the serial numbers are 275xxxx and it says on the serial list its a 1964 What is the value of the gun?

Nov 29, 2013  But that they did not find all of the owners of the Model 1100 / 870's that it pertained to. Could you imagine trying to find a couple of million gun owners. Anyone that could furnish them with a good serial number got a refund. Search Firearms by Serial Number Please enter the firearm serial number using only letters and numbers without spaces or other special characters. Serial Number (required).

It is pre 1964 with a serial # of 496507 Read More

How much is a gun worth with no serial numbers on it?

There is no set price. Rifles and shotguns made before 1968 were not required to HAVE serial numbers. I have several dozen in my collection, and not having a SN does not add to the value. However, REMOVING a serial number from a gun is worth 10 years in prison. Read More

What gun has serial number 152172?

No way to answer. Serial numbers are NOT unique to only one gun in the world. Read More

What does the serial number on a gun tell you?

It is only an identifying mark. It MAY tell you what year it was made. Read More

What is the value of an enfield pistol serial number 2311?

We can no more give you the value of a gun using the serial number than we could give you the value of a car using only the license plate number. The value of ANY firearm is based on the exact make, model and CONDITION. You gave us the make. BTW, serial numbers are NOT unique to only 1 firearm in the world. Your best bet will be to visit a gun shop or gun… Read More

What is a value of a Winchester gun serial 93677?

Impossible to value a weapon with only the serial number. Read More

What is the value of a 12 gauge choke serial A203136 from Spencer gun company?

What is the value of a Spencer Gun Company 12 guage choke shot gun serial number A203136? Read More

What is the value of model 12 serial number 246710?

You can't value anything with just a serial number. Who made it? What condition is it in? Is it a hand gun or a long gun? Read More

What is the value of a 16 gauge Ithaca side by side serial 48736 in 80-85 percent condition?

Many things determine the value of your gun. Serial #48736 falls in the serial numbers 46628-61609 which states that your gun was made in 1901. I have read somewhere that 16ga. are worth quite a bit more than the rest of the gauges Read More

What is the value of a 22 hand gun P 101 serial?

Impossible to value with just the serial number. Read More

What is the value of a Winchester 94 serial 2219695?

I've seen guns with similar serial numbers sell between $800-$1200 at the Reno gun show, but Winchester rifles are hot right now and you can expect somewhat of an increase in value. Read More

Does a low serial number on a gun make it worth more?

Low serial numbers can increase a firearm's value if they are very low, but somtimes things change during the production of firearms and higher serial numbers might be worth more. It really depends on the make and model of the firearm. Read More

What kind of gun is serial number 25751?

Impossible to answer. A serial number is NOT unique to only one gun in the world- if it were so, serial numbers will be numbered into the trillions. Read More

You found a Firearm co Alpine gun with out serial number is it possibel that a gun with out serial number?

Firearms weren't required to have serial numbers until the passage of the Gun Control Act of 1968. Read More

Where is the serial numbers located on a mossberg model 173ya shot gun?

There isn't one. That model was made in 1963 to 1968. Serial numbers weren't required back then, and having a gun that never had a serial number IS legal. Read More

How old is my gun serial no 60247MT?

No way to tell without make and model. Serial numbers are not unique to only one gun. Read More

What is Ithaca gun serial number 84806?

No way to answer. Serial numbers do not work that way. Read More

What is the value of a lefever side by side gun serial number 300437a in a 75 condition?

Somewhere between $200 and $3000. Lefever ceased operation in 1913 or so. They were well made guns, and DO have a collector's market- but value is based on MAKE MODEL and CONDITION. You will need a hands-on appraisal. Take your shotgun to a good gun shop or gun show in your area. Read More

How old is your Ithaca 37 16 gauge ser. 2235331?

All Ithaca Gun Company models with seven-digit serial numbers were manufactured in 1968 and 1969, before they changed to a different identifying scheme. The serial number indicates your Model 37 was made in 1969. Read More

What gun has serial number 15967?

There are likely several THOUSAND guns with that number. Serial numbers are NOT unique to only one gun in the world. Read More

What type of gun is miroku no 35044pp?

It is not possible to tell a model from the serial number. Serial numbers are not unique to only one gun in the world. Read More

How can you look up a gun by its serial number?

You find a published list of serial numbers for the maker. Read More

What kind of semi auto hand gun frame do you have serial?

Serial numbers are not exclusive to one gun - hence, there is no way of answering this question, even if you had provided the serial number. Read More

What date was gun manufacture serial number KUS499LE?

Impossible to answer. Serial numbers are not unique to only one firearm, and there is no single database of ALL firearm serial numbers. Read More

How do you find the model for a gun if all you have is the serial number?

Sorry, but you probably cannot. Most serial numbers alone do not convey much information, and despite belief to the contrary, a serial number is NOT unique to only one gun in the world (or serial numbers would run into the billions) Read More

Where can you find dates and serial numbers on an Ithaca SKB shotgun?

You can find these numbers in the manual that come with your gun. They are also present on the handle of the gun. Read More

What is the value of a black powder gun made in Spain with Serial number 31587 25 cal?

The value of a black powder gun made in Spain with serial number 31587 25 Cal is worth approximately $150. The exact value will depend upon the condition of the gun. Read More

Where can you find the value of the gun withe the serial?

On line auctions, Blue Book of Gun Values. Read More

What is the value of a belgium made browning light twelve with the serial numbers 97380 the gun was bought new in 1960 and the gun is beautiful and in excellant condition?

If your browning has a 0G prefix to that serial number then it is a light twelve made in 1960. The value is 450-600 dollars in the condition you describe.If it has a vent rib barrel then it is worth 600-750 dollars. Read More

Serial numbers of colt firearms?

i am looking for the same. the serial no. is located on the but of the gun. good luck skip Read More

How do you see how old a gun is?

By comparing markings, serial numbers etc to known records from gun makers. Read More

What is age and value of model 1892 patent Oct 14 1884 serial number 228258?

The gun was manufactured in 1903. These serial numbers can be looked up at http://www.savage99.com/winchester1892_dates.htm. Value is dependent on the grade of the rifle. This information can be found by taking it to a dealer/appraiser. Read More

What is the age and value of a 38 caliber Colt Official Police revolver serial 550701 if most of the blue is gone and serial numbers match on all parts?

made around 1930. Value is decided by condition,markings,and history of the gun. Start at $200 and go up from there. Read More

How much is a gun worth with matching serial numbers 79219 and in good condition?

Before we can put a value on it, we need to know what it is. Your question is like asking 'How much is a car worth with 79212 on the license tag.' Matching serial numbers are only important on a collectable firearm. Hunters don't care what the serial numbers on their guns are and few modern firearms have the serial number in more than one place. Read More

What year did serial numbers on firearms become required?

Serial numbers on firearms in US were made mandatory by the Gun Control Act of 1968. Read More

When need serial numbers on firearms become required?

In the United States, serial numbers became required with the passage of the Gun Control Act of 1968. Read More

When was a gun with the serial number 27764 made and what is its caliber?

No way for us to tell without more information. Serial numbers are NOT unique to any one gun. Read More

Where to find gun serial numbers?

you will find it on the barrel or action of the firearm Read More

What was the manufacture date of Model 94 serial number 2775608 and what is its approximate value?

Go to the Winchester site. There used to be a link that you could follow that showed ranges of serial numbers and manufacture dates. I don't know about where to go for value. You could go to a gun store and ask for them to give you an approximate value for insurance. Read More

What is the value of a Browning sweet sixteen serial number S23225?

Your gun was made in 1955. Use the link below to learn about the value of this gun. Read More

What is a 5000 Double barrel shot gun ranger value?

What is th value of a Ranger double shot gun. Serial c4537.It is a 16g Read More

What year was a Springfield manufactured by J Stevens Arms Co 22 cal s l or lr model 52-a manufactured if there is no serial?

before 1955 gun under 100 in value did not need serial numbers Read More

What is the value of a 32 caliber Winchester Model 94 serial 1412132?

According to Standard Catalog of Firearms your gun was munfactured during WWII, probably 1946. They stopped cataloging serial numbers in 1942, with 1,221,289, and started again after the war, in 1948, beginning with 1,500,000. The value of your gun, if in 75% good condition, is about $350-450. If it is 90%, the value increases to $600+. Hope this helps you, A fellow Winchester collector Read More

How many serial numbers is on a bolt action 3030 bought back before 1972?

There is ONE serial number (may have several digits that make up entire number) The serial number is the number on the receiver (frame) of the gun, Other numbers may be assembly numbers or parts numbers. By law, the receiver IS the gun- the rest is only 'parts'. Read More

Firearms Verification

Firearms Verification Overview

Marking Requirements

Serial Number

• Must be conspicuously engraved, cast or stamped (impressed) on the firearm frame or receiver
  
• The serial number cannot duplicate the serial number appearing on any other firearm the importer previously imported
  
• For firearms imported after January 30, 2002, the engraving, casting or stamping (impressing) of the serial number must be to a minimum depth of .003 inch and in a print size no smaller than 1/16 inch

Name of Manufacturer

Identify Gun By Serial Number

• Must be conspicuously engraved, cast or stamped (impressed) on the firearm frame, receiver, barrel or slide
• For firearms imported after January 30, 2002, the engraving, casting or stamping (impressing) of the serial number must be to a minimum depth of .003 inch

Country of Origin

• Must be conspicuously engraved, cast or stamped (impressed) on the firearm frame, receiver, barrel or slide
  
• For firearms imported after January 30, 2002, the engraving, casting or stamping (impressing) of the country of origin must be to a minimum depth of .003 inch

Model Designation (if assigned)

• Must be conspicuously engraved, cast or stamped (impressed) on the firearm frame, receiver, barrel or slide
  
• For firearms imported after January 30, 2002, the engraving, casting or stamping (impressing) of the model designation must be to a minimum depth of .003 inch

Caliber or Guage

• Must be conspicuously engraved, cast or stamped (impressed) on the firearm frame, receiver, barrel or slide
  
• For firearms imported after January 30, 2002, the engraving, casting or stamping (impressing) of the caliber or gauge must be to a minimum depth of .003 inch

Name of Importer

• Must be conspicuously engraved, cast or stamped (impressed) on the firearm frame, receiver, barrel or slide
  
• For firearms imported after January 30, 2002, the engraving, casting or stamping (impressing) of the importer’s name must be to a minimum depth of .003 inch

City & State of the Importer

• Must be conspicuously engraved, cast or stamped (impressed) on the firearm frame, receiver, barrel or slide
  
• For firearms imported after January 30, 2002, the engraving, casting or stamping (impressing) of the importer’s city and state must be to a minimum depth of .003 inch

Note: The importer must ensure that these marks of identification appear on each firearm. If the manufacturer did not mark them, the importer must place the required markings on the firearm within 15 days after their release from Customs and Border Protection custody. The Director, Bureau of Alcohol, Tobacco, Firearms and Explosives may authorize other means of firearms identification upon receipt of a letter application from the importer, submitted in duplicate, showing that such other means of identification is reasonable and will not hinder the effective administration of the regulations.

Identification of Firearms

Q: How must licensed manufacturers and licensed importers identify firearms, armor piercing ammunition?

• Firearms. You, as a licensed manufacturer or licensed importer of firearms, must legibly identify each firearm manufactured or imported as follows:

1. By engraving, casting, stamping (impressing), or otherwise conspicuously placing or causing to be engraved, cast, stamped (impressed) or placed on the frame or receiver thereof an individual serial number. The serial number must be placed in a manner not susceptible of being readily obliterated, altered, or removed, and must not duplicate any serial number placed by you on any other firearm. For firearms manufactured or imported on and after January 30, 2002, the engraving, casting, or stamping (impressing) of the serial number must be to a minimum depth of .003 inch and in a print size no smaller than 1/16 inch; and

2. By engraving, casting, stamping (impressing), or otherwise conspicuously placing or causing to be engraved, cast, stamped (impressed) or placed on the frame, receiver, or barrel thereof certain additional information. This information must be placed in a manner not susceptible of being readily obliterated, altered, or removed. For firearms manufactured or imported on and after January 30, 2002, the engraving, casting, or stamping (impressing) of this information must be to a minimum depth of .003 inch. The additional information includes:

   1. The model, if such designation has been made;

   2. The caliber or gauge:

   3. Your name (or recognized abbreviation) and also, when applicable, the name of the foreign manufacturer;

   4. In the case of a domestically made firearm, the city and State (or recognized abbreviation thereof) where you as the manufacturer maintain your place of business; and

   5. In the case of an imported firearm, the name of the country in which it was manufactured and the city and State (or recognized abbreviation thereof) where you as the importer maintain your place of business. For additional requirements relating to imported firearms, see Customs regulations at 19 CFR part 134.

3. Firearm frames or receivers. A firearm frame or receiver that is not a component part of a complete weapon at the time it is sold, shipped, or otherwise disposed of by you must be identified as required by this section.

4. Special markings for semiautomatic assault weapons, effective July 5, 1995. In the case of any semiautomatic assault weapon manufactured after September 13, 1994, you must mark the frame or receiver “RESTRICTED LAW ENFORCEMENT / GOVERNMENT USE ONLY” or, in the case of weapons manufactured for export, “FOR EXPORT ONLY,” in a manner not susceptible of being readily obliterated, altered, or removed. For weapons manufactured or imported on and after January 30, 2002, the engraving, casting, or stamping (impressing) of the special markings prescribed in this paragraph (a)(3) must be to a minimum depth of .003 inch.

   Note: Section 478.92(a)(3) Repealed on September 13, 2004

5. Exceptions:

   1. Alternate means of identification. The Director may authorize other means of identification upon receipt of a letter application from you, submitted in duplicate, showing that such other identification is reasonable and will not hinder the effective administration of this part.

   2. Destructive devices. In the case of a destructive device, the Director may authorize other means of identifying that weapon upon receipt of a letter application from you, submitted in duplicate, showing that engraving, casting, or stamping (impressing) such a weapon would be dangerous or impracticable.

   3. Machine guns, silencers, and parts. Any part defined as a machine gun, firearm muffler, or firearm silencer in Sec. 478.11, that is not a component part of a complete weapon at the time it is sold, shipped, or otherwise disposed of by you, must be identified as required by this section. The Director may authorize other means of identification of parts defined as machine guns other than frames or receivers and parts defined as mufflers or silencers upon receipt of a letter application from you, submitted in duplicate, showing that such other identification is reasonable and will not hinder the effective administration of this part.

6. Measurement of height and depth of markings. The depth of all markings required by this section will be measured from the flat surface of the metal and not the peaks or ridges. The height of serial numbers required by paragraph (a)(1)(i) of this section will be measured as the distance between the latitudinal ends of the character impression bottoms (bases).

7. Armor piercing ammunition.

   1. Marking of ammunition. Each licensed manufacturer or licensed importer of armor piercing ammunition shall identify such ammunition by means of painting, staining or dying the exterior of the projectile with an opaque black coloring. This coloring must completely cover the point of the projectile and at least 50 percent of that portion of the projectile which is visible when the projectile is loaded into a cartridge case.

   2. Labeling of packages. Each licensed manufacturer or licensed importer of armor piercing ammunition shall clearly and conspicuously label each package in which armor piercing ammunition is contained, e.g., each box, carton, case, or other container. The label shall include the words “ARMOR PIERCING” in block letter at least 1/4 inch in height. The lettering shall be located on the exterior surface of the package which contains information concerning the caliber or gauge of the ammunition. There shall also be placed on the same surface of the package in block lettering at least 1/8 inch in height the words “FOR GOVERNMENTAL ENTITIES OR EXPORTATION ONLY.” The statements required by this subparagraph shall be on a contrasting background.

8. Large capacity ammunition feeding devices manufactured after September 13, 1994.

   1. Each person who manufactures or imports any large capacity ammunition feeding device manufactured after September 13, 1994, shall legibly identify each such device with a serial number. Such person may use the same serial number for all large capacity ammunition feeding devices produced.

      1. Additionally, in the case of a domestically made large capacity ammunition feeding device, such device shall be marked with the name, city and State (or recognized abbreviation thereof) of the manufacturer;

      2. And in the case of an imported large capacity ammunition feeding device, such device shall be marked:

         1. With the name of the manufacturer, country of origin, and,

         2. Effective July 5, 1995, the name, city and State (or recognized abbreviation thereof) of the importer.

      3. Further, large capacity ammunition feeding devices manufactured after September 13, 1994, shall be marked “RESTRICTED LAW ENFORCEMENT / GOVERNMENT USE ONLY” or, in the case of devices manufactured or imported for export, effective July 5, 1995, “FOR EXPORT ONLY.”

   2. All markings required by this paragraph (c) shall be cast, stamped, or engraved on the exterior of the device. In the case of a magazine, the markings shall be placed on the magazine body.

   3. Exceptions:

      1. Metallic links. Persons who manufacture or import metallic links for use in the assembly of belted ammunition are only required to place the identification marks prescribed in paragraph (c)(1) on this section on the containers used for the packaging of the links

      2. Alternate means of identification. The Director may authorize other means of identifying large capacity ammunition feeding devices upon receipt of a letter application, in duplicate, from the manufacturer or importer showing that such other identification is reasonable and will not hinder the effective administration of this part

Note: Section 478.92(c) Repealed on September 13, 2004

Q: How must firearms be identified?

• You, as a manufacturer, importer, or maker of a firearm, must legibly identify the firearm as follows:

1. By engraving, casting, stamping (impressing), or otherwise conspicuously placing or causing to be engraved, cast, stamped (impressed) or placed on the frame or receiver thereof an individual serial number. The serial number must be placed in a manner not susceptible of being readily obliterated, altered, or removed, and must not duplicate any serial number placed by you on any other firearm. For firearms manufactured, imported, or made on and after January 30, 2002, the engraving, casting, or stamping (impressing) of the serial number must be to a minimum depth of .003 inch and in a print size no smaller than 1/16 inch; and

2. By engraving, casting, stamping (impressing), or otherwise conspicuously placing or causing to be engraved, cast, stamped (impressed), or placed on the frame, receiver, or barrel thereof certain additional information. This information must be placed in a manner not susceptible of being readily obliterated, altered or removed. For firearms manufactured, imported, or made on and after January 30, 2002, the engraving, casting, or stamping (impressing) of this information must be to a minimum depth of .003 inch. The additional information includes:

   1. The model, if such designation has been made;

   2. The caliber or gauge;

   3. Your name (or recognized abbreviation) and also, when applicable, the same of the foreign manufacturer or maker;

   4. In the case of a domestically made firearm, the city and State (or recognized abbreviation thereof) where you as the manufacturer maintain your place of business, or where you, as the maker, made the firearm; and

   5. In the case of an imported firearm, the name of the country in which it was manufactured and the city and State (or recognized abbreviation thereof) where you as the importer maintain your place of business. For additional requirements relating to imported firearms, see Customs regulations at 19 CFR part 134.

3. The depth of all markings required by this section will be measured from the flat surface of the metal and not the peaks or ridges. The height of serial numbers required by paragraph (a)(1) of this section will be measured as the distance between the latitudinal ends of the character impression bottoms (bases).

4. The Director may authorize other means of identification upon receipt of a letter application from you, submitted in duplicate, showing that such other identification is reasonable and will not hinder the effective administration of this part.

5. In the case of a destructive device, the Director may authorize other means of identifying that weapon upon receipt of a letter application from you, submitted in duplicate, showing that engraving, casting, or stamping (impressing) such a weapon would be dangerous or impracticable.

6. A firearm frame or receiver that is not a component part of a complete weapon at the time it is sold, shipped, or otherwise disposed of by you must be identified as required by this section.

1. Any part defined as a machine gun, muffler, or silencer for the purposes of this part that is not a component part of a complete firearm at the time it is sold, shipped, or otherwise disposed of by you must be identified as required by this section.

2. The Director may authorize other means of identification of parts defined as machine guns other than frames or receivers and parts defined as mufflers or silencers upon receipt of a letter application from you, submitted in duplicate, showing that such other identification is reasonable and will not hinder the effective administration of this part.

ATF Rulings

ATF Ruling 2002-6

The Bureau of Alcohol, Tobacco and Firearms (ATF) has been asked by State and local law enforcement officials to trace firearms that are marked, in part, with non-Roman letters and/or non-Arabic numbers. Specifically, ATF received a request to trace a Makarov type pistol made in Bulgaria. The original manufacturer marking was ИМ 18 355. Because the importer did not stamp the firearm with a unique identifier that could be recognized by either ATF or a State or local law enforcement official, and because the marking contained a Cyrillic character, the firearm was not properly recorded, resulting in a failed trace of the weapon.

Because markings with non-Roman characters or non-Arabic are not easily recorded or transmitted through means by importers, dealers, or distributors, many firearm traces have proved unsuccessful. In some cases, an importer attempts to translate portions of the markings into Roman letters and Arabic numbers and re-marks the weapon with the serial number ДМ7639И. The importer translated the marking as LM7639i but rather than restamp the entire number merely added the letters “L” and “i” below the original markings. This practice often results in failed traces because those required to record the markings (importers, dealers, or distributors) may record only the translated portions or both sets of markings. Moreover, law enforcement recovering a firearm with such markings may submit a trace request lacking some portion of the markings, further impeding efforts to successfully trace the firearm.

In addition, ATF has found that some traces have failed because the required markings on the firearms barrel were wholly partially obstructed from plain view by a flash suppressor or bayonet mount, resulting in the Federal Firearms Licensee creating an inaccurate record. ATF has been unable to trace hundreds of firearms as a result of nonstandard or obscured markings.

As a result of these practices, some licensed importers my not be in compliance with the marking requirements set forth in 27 CFR 178.92^[a] and 27 CFR 179.102^[a] because they have marked using non-Roman letters (such as Greek or Russian letters, Δ or Д) or non-Arabic numbers (e.g., XXV).

The above regulations require markings that legibly identify each item or package and require that such markings be conspicuous. ATF has consistently taken the position that “legibly” marked means using exclusively Roman letters, (A, a, B, b, C, c, and so forth) and ‘conspicuous” means that all required markings must be placed in such a manner as to be wholly unobstructed from plain view. These regulation apply to licensed manufacturers and licensed importers relative to firearms, armor piercing ammunition, and large capacity ammunition feeding devices, and to makers of National Firearms Act firearms.

Firearms, armor piercing ammunition and large capacity ammunition feeding devices which contain required markings or labels using non-Roman letters (such as Greek or Russian letters, Δ or Д) or non-Arabic letter (e.g., XXV), must be completely remarked or relabeled with a new serial number or other required markings that satisfy the legibility requirements described above. It is not sufficient to simply add an additional Roman letter or Arabic numeral to a nonconforming marking; a new and unique marking using Roman letters and Arabic numerals is required. When feasible, the new markings should be placed directly above the non-compliant markings.

Similarly, firearms and large capacity ammunition feeding devices which contain required markings obstructed in whole or in part from plain view must be remarked with required markings that satisfy the conspicuousness requirements described above. For example, required markings may not be placed on a portion of the barrel where the markings would be wholly or partially obstructed from view by another part of the firearm, such as a flash suppressor or bayonet mount.

In certain unavoidable circumstances owing mainly to firearms of unusual design or other limiting factor(s) which would limit the ability of the manufacturer or importer to comply with the above legibility and conspicuousness requirements, alternate means of identification may be authorized as described in 27 CFR 178.92(a)(3)(i), (ii), or (iii)^[a] and 27 CFR 178.92(c)(3)(iii)^[a].

Held, a Makarov type pistol imported from Bulgaria utilizing Cyrillic letters or non-Arabic numbers is not marked in accordance with 27 CFR 178.92^[a] and 27 CFR 179.102^[a].

Held further, an imported firearm with any part of the required marking partially or wholly obstructed from plain view is not marked in accordance with section 27 CFR 178.92^[a] and 27 CFR 179.102^[a].

Date signed: November 5, 2002

New provisions are under Parts 478 and 479, not 178 and 179.

ATF Ruling 75-28

The Bureau has determined that in some cases, the serial number placed on a firearm by a foreign manufacturer is adequate to provide the identification number by 27 CFR § 178.92^[b]. See also 27 CFR § 178.22(a)^[b].

Identify Your Gun By Serial Number

Held, where a serial number has been placed on the frame or receiver of a firearm by a foreign manufacturer in the manner contemplated by 27 CFR § 178.92^[b], and such serial number does not duplicate a number previously adopted or assigned by the import to any other firearm, the importer may adopt the serial number of the foreign manufacturer.

Provided, the importer shall in all cases place his name and address (city and state or recognized abbreviation thereof), and any other marks necessary to comply with the identification requirements of 27 CFR § 178.92^[b], on such imported firearms.

Research Gun By Serial Number

New provisions are under Parts 478 and 479, not 178 and 179.

Industry Circulars

Duplication of Serial Numbers by Licensed Importers

ATF has noted cases where some licensed importers have adopted the same serial number for more than one firearm. These instances of duplication have generally occurred when firearms are received from more than one source.

Title 27 CFR § 178.92^[c] requires that the serial number affixed to a firearm must not duplicate the number affixed to any other firearm that you import into the United States. Those of you who import destructive devices are under the same requirement due to the inclusion of destructive devices in the definition of firearm as used in 27 CFR § 178.11^[c]. ATF Ruling 75-28 also reminds you of the other identifying marks required by 27 CFR § 178.92^[c]. In addition to a unique serial number, each firearm must be marked to show the model (if any); the caliber or gauge; the name of the manufacturer and importer, or recognizable abbreviations; the country of manufacture; and the city and State (or recognized abbreviations) in which your licensed premises are located.

Note: All cited references to regulation and statutes in the foregoing ATF rulings and industry circular use identifiers and section indicators in effect at the time the rulings and industry circular were approved. On January 24, 2003, ATF was part of a reorganization of government which placed it under the Department of Justice (DOJ). This transition resulted in certain changes within the numbering system and identification of ATF’s regulations now issued and referenced under the authority of DOJ.

New provisions are under Part 478, not 178.