Sccm Software Center Uninstall Greyed Out
SCCM 2012 recently was installed on clients. The remote desktop settings are greyed out and unable to RDP into an workstation. An uninstall of ccmsetup.exe /uninstall & reboot does NOT fix the problem. Hi I am running the latest CU update for SCCM 2012 R2 --> CU4. If I refresh Software Center the Uninstall button is greyed out of that app. New Software Center is available in ConfigMgr/SCCM 1511 vNext TP4. However, by default this is not enabled. When you install SCCM/ConfigMgr client then software center is the same one which you can see in SCCM 2012 version. So, how to enable the new Software Center in the next version of SCCM.
-->Applies to: System Center Configuration Manager (Current Branch)
Create or simulate a deployment of an application to a device or user collection in Configuration Manager. This deployment gives instructions to the Configuration Manager client on how and when to install the software.
Before you can deploy an application, create at least one deployment type for the application. For more information, see Create applications.
You can also simulate an application deployment. This simulation tests the applicability of a deployment without installing or uninstalling the application. A simulated deployment evaluates the detection method, requirements, and dependencies for a deployment type and reports the results in the Deployments node of the Monitoring workspace. For more information, see Simulate application deployments.
Note
You can only simulate the deployment of required applications, but not packages or software updates.
MDM-enrolled devices don't support simulated deployments, user experience, or scheduling settings.
Deploy an application
In the Configuration Manager console, go to the Software Library workspace, expand Application Management, and select the Applications node.
In the Applications list, select an application to deploy. In the ribbon, click Deploy.
Note
When you view the properties of an existing deployment, the following sections correspond to tabs of the deployment properties window:
Deployment General information
On the General page of the Deploy Software wizard, specify the following information:
Software: This value displays the application to deploy. Click Browse to select a different application.
Collection: Click Browse to select the collection to deploy the application to.
Use default distribution point groups associated to this collection: Store the application content on the collection's default distribution point group. If you haven't associated the selected collection with a distribution point group, this option is grayed out.
Automatically distribute content for dependencies: If any of the deployment types in the application have dependencies, then the site also sends dependent application content to distribution points.
Note
If you update the dependent application after deploying the primary application, the site doesn't automatically distribute any new content for the dependency.
Comments (optional): Optionally, enter a description for this deployment.
Deployment Content options
On the Content page, click Add to distribute the content for this application to a distribution point or a distribution point group.
If you selected the option to Use default distribution points associated to this collection on the General page, then this option is automatically populated. Only a member of the Application Administrator security role can modify it.
If the application content is already distributed, then they appear here.
Deployment Settings
On the Deployment Settings page, specify the following information:
Action: From the drop-down list, choose whether this deployment is to Install or Uninstall the application.
Note
If you create a deployment to Install an app and another deployment to Uninstall the same app on the same device, the Install deployment takes priority.
You can't change the action of a deployment after you create it.
Purpose: From the drop-down list, choose one of the following options:
Available: The user sees the application in Software Center. They can install it on demand.
Required: The client automatically installs the app according to the schedule that you set. If the application isn't hidden, a user can track its deployment status. They can also use Software Center to install the application before the deadline.
Note
When you set the deployment action to Uninstall, the deployment purpose is automatically set to Required. You can't change this behavior.
Allow end users to attempt to repair this application: Starting in version 1810, if you created the application with a repair command line, enable this option. Users see an option in Software Center to Repair the application.
Pre-deploy software to the user's primary device: If the deployment is to a user, select this option to deploy the application to the user’s primary device. This setting doesn't require the user to sign in before the deployment runs. If the user must interact with the installation, don't select this option. This option is only available when the deployment is Required.
Send wake-up packets: If the deployment is Required, Configuration Manager sends a wake-up packet to computers before the client runs the deployment. This packet wakes the computers at the installation deadline time. Before using this option, computers and networks must be configured for Wake On LAN. For more information, see Plan how to wake up clients.
Allow clients on a metered Internet connection to download content after the installation deadline, which might incur additional costs: This option is only available for deployments with a purpose of Required.
Automatically upgrade any superseded version of this application: The client upgrades any superseded version of the application with the superseding application.
Note
This option works regardless of administrator approval. If an administrator already approved the superseded version, they don't need to also approve the superseding version. Approval is only for new requests, not superseding upgrades.
Note
Starting in version 1802, for Available install purpose, you can enable or disable this option.
Approval settings
One of the following approval settings appears, depending upon your version of Configuration Manager:
Require administrator approval if users request this application: For versions 1710 and prior, the administrator approves any user requests for the application before the user can install it. This option is grayed out when the deployment purpose is Required, or when you deploy the application to a device collection.
An administrator must approve a request for this application on the device: Starting in version 1802, the administrator approves any user requests for the application before the user can install it on the requested device. If the administrator approves the request, the user is only able to install the application on that device. The user must submit another request to install the application on another device. This option is grayed out when the deployment purpose is Required, or when you deploy the application to a device collection.
Starting in version 1810, you can also define a list of email addresses to notify about the approval request.
For more information, see Approve applications.
Deployment properties Deployment Settings
When you view the properties of a deployment, if supported by the deployment type technology, the following option appears on the Deployment Settings tab:
Automatically close any running executables you specified on the install behavior tab of the deployment type properties dialog box. For more information, see check for running executable files before installing an application.
Deployment Scheduling settings
On the Scheduling page, set the time when this application is deployed or available to client devices.
By default, Configuration Manager makes the deployment policy available to clients right away. If you want to create the deployment, but not make it available to clients until a later date, configure the option to Schedule the application to be available. Then select the date and time, including whether that's based on UTC or the client's local time.
If the deployment is Required, also specify the Installation deadline. By default this deadline is as soon as possible.
For example, you need to deploy a new line-of-business application. All users need to install it by a certain time, but you want to give them the option to opt-in early. You also need to make sure that the site has distributed the content to all distribution points. You schedule the application to be available in five days from today. This schedule gives you time to distribute the content and confirm its status. You then set the installation deadline for one month from today. Users see the application in Software Center when it's available in five days. If they do nothing, the client automatically installs the application at the installation deadline.
If the application you're deploying supersedes another application, set the installation deadline when users receive the new application. Set the Installation Deadline to upgrade users with the superseded application.
Delay enforcement with a grace period
You might want to give users more time to install required applications beyond any deadlines you set. This behavior is typically required when a computer is turned off for a long time, and needs to install many applications. For example, when a user returns from vacation, they have to wait for a long time as the client installs overdue deployments. To help solve this problem, define an enforcement grace period.
First, configure this grace period with the property Grace period for enforcement after deployment deadline (hours) in client settings. For more information, see the Computer agent group. Specify a value between 1 and 120 hours.
On the Scheduling page of a required application deployment, enable the option to Delay enforcement of this deployment according to user preferences, up to the grace period defined in client settings. The enforcement grace period applies to all deployments with this option enabled and targeted to devices to which you also deployed the client setting.
After the deadline, the client installs the application in the first non-business window, which the user configured, up to this grace period. However, the user can still open Software Center and install the application at any time. Once the grace period expires, enforcement reverts to normal behavior for overdue deployments.
Note
Most of the time, this feature addresses the scenario when the device is powered off while the user is out of the office. Technically, the grace period starts when the client gets policy after the deployment deadline. The same behavior happens if you stop the Configuration Manager client service (CcmExec), and then restart it at some time after the deployment deadline.
Deployment User Experience settings
On the User Experience page, specify information about how users can interact with the application installation.
User notifications: Specify whether to display notification in Software Center at the configured available time. This setting also controls whether to notify users on the client computers. For available deployments, you can't select the option to Hide in Software Center and all notifications.
- When software changes are required, show a dialog window to the user instead of a toast notification: Starting in version 1902, select this option to change the user experience to be more intrusive. It only applies to required deployments. For more information, see Plan for Software Center.
Software Installation and System restart: Only configure these settings for required deployments. They specify the behaviors when the deployment reaches the deadline outside of any defined maintenance windows. For more information about maintenance windows, see How to use maintenance windows.
Write filter handling for Windows Embedded devices: This setting controls the installation behavior on Windows Embedded devices that are enabled with a write filter. Choose the option to commit changes at the installation deadline or during a maintenance window. When you select this option, a restart is required and the changes persist on the device. Otherwise, the application is installed to the temporary overlay, and committed later.
- When you deploy a software update to a Windows Embedded device, make sure the device is a member of a collection that has a configured maintenance window. For more information about maintenance windows and Windows Embedded devices, see Create Windows Embedded applications.
Deployment Alerts
On the Alerts page, configure how Configuration Manager generates alerts for this deployment. If you're also using System Center Operations Manager, configure its alerts as well. You can only configure some alerts for required deployments.
iOS: App Configuration Policies
When deploying an iOS deployment type, you'll also see the App Configuration Policies page. If you've already created an iOS app configuration policy, click New to associate this deployment with the policy. For more information about this type of policy, see Configure iOS apps with app configuration policies.
Create a phased deployment
Starting in version 1806, create a phased deployment for an application. Phased deployments allow you to orchestrate a coordinated, sequenced rollout of software based on customizable criteria and groups. For example, deploy the application to a pilot collection, and then automatically continue the rollout based on success criteria.
For more information, see the following articles:
Delete a deployment
In the Configuration Manager console, go to the Software Library workspace, expand Application Management, and select the Applications node.
In the Applications list, select the application that includes the deployment you want to delete.
Switch to the Deployments tab of the details pane, and select the application deployment.
In the ribbon, on the Deployment tab and the Deployment group, click Delete.
When you delete an application deployment, any instances of the application that clients have already installed aren't removed. To remove these applications, deploy the application to computers to Uninstall. If you delete an application deployment, or remove a resource from the collection to which you're deploying, the application is no longer visible in Software Center.
User notifications for required deployments
When users receive required software, and select the Snooze and remind me setting, they can choose from the following options:
Later: Specifies that notifications are scheduled based on the notification settings configured in client settings.
Fixed time: Specifies that the notification is scheduled to display again after the selected time. For example, if you select 30 minutes, the notification displays again in 30 minutes.
The maximum snooze time is always based on the notification values configured in the client settings at every time along the deployment timeline. For example:
You configure the Deployment deadline greater than 24 hours, remind users every (hours) setting on the Computer Agent page for 10 hours.
The client displays the notification dialog more than 24 hours before the deployment deadline.
The dialog shows snooze options up to but never greater than 10 hours.
As the deployment deadline approaches, the dialog shows fewer options. These options are consistent with the relevant client settings for each component of the deployment timeline.
For a high-risk deployment, such as a task sequence that deploys an operating system, the user notification experience is more intrusive. Instead of a transient taskbar notification, a dialog box like the following displays each time you're notified that critical software maintenance is required:
Check for running executable files
Configure a deployment to check if certain executable files are running on the client. Use this option to check for processes that might disrupt the installation of the application. If one of these executable files is running, the client blocks the installation of the deployment type. The user must close the running executable file before the client can install the deployment type. For deployments with a purpose of required, the client can automatically close the running executable file.
Open the Properties dialog box for the deployment type.
Switch to the Install Behavior tab, and click Add.
In the Add Executable File dialog box, enter the name of the target executable file. Optionally, enter a friendly name for the application to help you identify it in the list.
Click OK, then click OK to close the deployment type properties window.
When you deploy the application, select the option to Automatically close any running executables you specified on the install behavior tab of the deployment type properties dialog box. This option is on the Deployment Settings tab of the deployment properties. Wondershare dr fone serial crack.
Client behaviors and user notifications
After clients receive the deployment, the following behavior applies:
If you deployed the application as Available, and a user tries to install it, the client prompts the user to close the specified running executable files before proceeding with the installation.
If you deployed the application as Required, and specified to Automatically close any running executables you specified on the install behavior tab of the deployment type properties dialog box, then the client displays a notification. It informs the user that the specified executable files are automatically closed when the application installation deadline is reached.
Schedule these dialogs in the Computer Agent group of client settings. For more information, see Computer agent.
If you don’t want the user to see these messages, select the option to Hide in Software Center and all notifications on the User Experience tab of the deployment's properties. For more information, see Deployment User Experience settings.
If you deployed the application as Required, and didn't specify to Automatically close any running executables you specified on the install behavior tab of the deployment type properties dialog box, then the installation of the app fails if one or more of the specified applications are running.
Deploy user-available applications on Azure AD-joined devices
If you deploy applications as available to users, starting in version 1802 they can browse and install them through Software Center on Azure Active Directory (Azure AD) devices.
Prerequisites
Enable HTTPS on the management point
Integrate the site with Azure AD for Cloud Management
- Configure Azure AD User Discovery
Deploy an application as available to a collection of users from Azure AD
Distribute any application content to a cloud distribution point
Enable the client setting Use new Software Center in the Computer agent group
The client OS must be Windows 10, and joined to Azure AD. Either as purely cloud domain-joined, or hybrid Azure AD-joined.
To support internet-based clients:
Enable the client setting: Enable user policy requests from Internet clients in the Client Policy group Html5 css3 y javascript anaya pdf descargar 2014.
To support clients on the intranet:
Add the cloud distribution point to a boundary group used by the clients
Clients must resolve the fully qualified domain name (FQDN) of the HTTPS-enabled management point
Next steps
Sccm uninstall greyed out keyword after analyzing the system lists the list of keywords related and the list of websites with related content, in addition you can see which keywords most interested customers on the this website
Keyword Suggestions
Most Searched Keywords
Sccm Uninstall Greyed Out
Domains Actived Recently
› Bbs.duomiluntan.com
› Ccswrm.kku.ac.th
› Conciergeautogroup.com
› Events-franken.de
› Mihs.daltonpublicschools.com
› Na.industrial.panasonic.com
› Sobhiran.com.pagesstudy.com
› Tiven.wang
› Web-site-guarantee.com
Websites Listing
We found at least 10 Websites Listing below when search with sccm uninstall greyed out on Search Engine
› software center uninstall greyed out
› Uninstall application from sccm
› Uninstall application using sccm 2012
› app uninstall greyed out
Uninstall dependencies, how?! - System Center ..
But they are not uninstalled if I uninstall the main application (using the old control panel and/or Win 10 Settings / Apps). The uninstall button is greyed out in Software Center. How do I get the uninstall button in Software Center to uninstall the application and the two dependencies? Is it possible? Regards P-H
SCCM 2012 R2 Application Uninstall Button is Grayed Out
I’ve found a bug in the latest SCCM release. SCCM 2012 R2 application uninstall button is grayed out. An application cannot be uninstalled using Software Center when it contains more than one deployment type.
Evaluate App Requirements at App Uninstall – Welcome to ..
Consider an app with multiple deployment types using different requirement rules filtering on items such as platform (x86, x64, APP-V, etc). When the app is configured the requirement logic is evaluated and the proper deployment type executed.
How to uninstall or remove SCCM client - TechNet Articles ..
In some situations, you may need to uninstall or remove SCCM client from a managed device. This could be done using multiple methods that are described in this Wiki article. Method 1: Uninstallation using CCMSetup.exe. You can proceed like the following:
Allow uninstall of applications with dependencies ..
Windows Uninstall Software Center
Allow uninstall of applications with dependencies When you deploy an application with dependencies, you loose the option to uninstall it from software center. It would be nice to be able to uninstall the main app and be able to choose if the dependencies would uninstall or not.
Why is the 'Delete' option greyed out for a Configuration ..
PROBLEM: I need to delete an Account in Configuration Manager. However, when I select the account in the ConfigMgr Console under AdministrationOverviewSecurityAccounts the Delete button is greyed out on the Ribbon. If I right-click the account the Delete option is also greyed out.
Application with two deployment types --> unistall button ..
I got the same issue with both applications --> the uninstall button in the software center is grey, so you can't uninstall those applications. All of the deployment types have an uninstall command line. Google says it is a well known bug with SCCM.. Do you have any ideas how to fix it? I am using SCCM 2012 R2. thanks
SCCM The Server cannot be deleted because it .. - Enterinit
SCCM The Server cannot be deleted because it contains the following roles. When i migrate to SQL 2016, I get this error: “The Server cannot be deleted because it contains the following roles:” Problem. Most of the things went smoothly but at one point for now we stuck. We’re not able to remove the old remote SQL Server.
› Skype download bg
› Bloat finding nemo
› Does my true signal tv really work
› Agimet e kaltra lektyra referat
› Sazka sportka vyhrali jste
› Online virtual training programs
Top